Page 21 of 33
Gearbox Input Shaft Seal GEA90432 Fits Nevada 350, 750 SP, 750 Targa, Strada 750, Nevada 750 (1991-2001), V65, V65 Florida, V65 GT, V65C, V75 PA, V50 PA, Breva 750, Nevada 750 (2002-2013), V7 Cafe, V7 Classic, V7 Racer, V7 II ALL, V7 III ALL, V9 ALL Dimensions: 45mm OD Input shaft oil seal for gearbox More than 5 in stock 90403245 GU90403245 90 40 32 45 9040 3245 9040.3245 90.40.32.45 £9.00 INC VAT £7.50 EX VAT
Air Filter UFI 2777900 conical SIA17113 Fits T3, T4, 1000 SP, Convert, G5, V35 I, V35 II, V35 3, V35C, Imola, Imola II, V50 I, V50 II, V50C, V50 3, Monza, NTX 350, V35 Florida, V40 Capri Dimensions: approx 195mm x 75mm diameter at wide end UFI 27 77 900 conical air filter See FUA90552 for air filter housing O ring More than 5 in stock 17113651 GU17113651 17 11 36 51 1711 3651 1711.3651 17.11.36.51 £12.00 INC VAT £10.00 EX VAT
Rear Wheel Spindle Nut and Washer Kit SSA92316 Fits 850/1000 ALL Models, Cali 1100 (1994-1997), Daytona, Centauro, Quota 1100, V35 ALL, V50 ALL, V65 ALL, Nevada 350, Nevada 750, V7 Sport, MGS-01 Dimensions: M16 M16 stainless steel full nut and thick washer for rear wheel spindle Also referred to as Guzzi ref. 14634400 and 92602316 More than 5 in stock 92602316-z 92602316 GU92602316 92 60 23 16 9260 2316 9260.2316 92.60.23.16 £10.50 INC VAT £8.75 EX VAT
Front Wheel Spindle Nut and Washer Kit SSA92516 Fits 850/1000 ALL Models, Cali 1100 (1994-1997), 1100 Sport carb, V35 ALL, V50 ALL, V65 ALL, Nevada 350, Nevada 750 Dimensions: M16 M16 stainless steel half nut and washers for front wheel spindle. Includes flat and wavy washer NB this is a half nut. Can also be used as alternator retaining nut 92603516 More than 5 in stock 92602516-z 92602516 GU92602516 92 60 25 16 9260 2516 9260.2516 92.60.25.16 £8.50 INC VAT £7.08 EX VAT
Bearing Steering Head SUA92249 Fits V7 700, V7 Special (1969-1971), V7 Sport, S3, 750S, 850T, 850 GT, 850/1000 ALL Models, 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV (1997-2006), Cali Stone, Cali Jackal, Cali Vintage, Nevada 350, Nevada 750, Quota ALL, V11 Sport, Centauro, Lario, V65 Florida, NTX 350, V35C (series 2), V50C (series 2), V65 GT, V65 TT, V65 Lario, V65 Florida, V75, 750T, Strada 750, 750 Targa, V7 Classic, V7 Cafe, V7 Racer, Breva 750, Bellagio, V7 II ALL
Taper needle roller bearing used as steering head bearing 2 sets required per bike. Also used as rear drive box pinion bearing on big twins with rear drum brake More than 5 in stock 92249225 GU92249225 92 24 92 25 9224 9225 9224.9225 92.24.92.25 £20.50 INC VAT £17.08 EX VAT
Clip Tank Badge TAA14100 Fits G5, Convert, T3, T4, 1000 SP, Le Mans 1, Le Mans 2, V35, V50 Dimensions: 4mm OD Tank badge retaining clip 2 required per badge More than 5 in stock 14105100 GU14105100 14 10 51 00 1410 5100 1410.5100 14.10.51.00 £2.00 INC VAT £1.67 EX VAT
Bolt Disc Bolt M8 BRA98460 Fits Le Mans 1, V35 I, V50 I, V50 II Dimensions: M8 x 60mm Bright zinc finish M8 hex head brake disc bolt Rear disc bolt for Le Mans 1-3 models, front disc bolt on Le Mans 1 models. 6 bolts required per disc. Front disc bolt on small twins More than 5 in stock 98052460 GU98052460 98 05 24 60 9805 2460 9805.2460 98.05.24.60 £1.30 INC VAT £1.08 EX VAT
Points Screw M4 SSA05012 Fits V35 II (Late Models), Imola, V50 3, Monza, V65 ALL Dimensions: M4 x 6mm Stainless steel M4 screw for attaching points to backplate 2 required.
Slotted screw More than 5 in stock £0.90 INC VAT £0.75 EX VAT
Automatic Bleed Valve M6 Bleed Nipple BRA41651 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT,Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL Dimensions: M6 x 16mm The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed. - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover More than 5 in stock
£26.50 INC VAT £22.08 EX VAT
Socket Cap Screw M5 x 50mm Stainless Steel SSA05050 Fits V65 GT, Strada 750, 750 Targa, Nevada 750 (1991-2001), NTX 350, NTX 650, V35 3, Cali 2, Spada 3, Cali 3, V65 Florida, 1000S, Mille GT Dimensions: M5 x 50mm A2 stainless socket cap screw M5 x 50, used for retaining Saprisa alternator stator More than 5 in stock 98620250-z 98620250 GU98620250 98 62 02 50 9862 0250 9862.0250 98.62.02.50 £1.20 INC VAT £1.00 EX VAT
Page 21 of 33
|